Технотелеком Сервіс

TCR180PEX
TCR180PEX - Зображення 2

TCR180PEX

ЗАПИТ

TCR180PEX приймає часові коди IRIG-A/B, IEEE 1344, IEEE C37.118 або AFNOR NF S87-500 і може використовуватися для синхронізації системного часу свого ПК

SKU: tcr180pex
Category: ,
Бренди:

Опис

TCR180PEX приймає часові коди IRIG-A/B, IEEE 1344, IEEE C37.118 або AFNOR NF S87-500 і може використовуватися для синхронізації системного часу свого ПК. Вихідний сигнал цієї карти може генерувати сигнал IRIG для інших зчитувачів часових кодів IRIG. Формат виводу незалежний від вхідного сигналу IRIG – ідеальне рішення для ваших потреб у перетворенні IRIG.

ХАРАКТЕРИСТИКИ

Status IndicatorsStatus info by 4 LED light indicators (2mm light pipes)Init – blue: while the receiver passes through the initialization phaseData – green: correct time code detectedTele – green: telegramm consistentFail – red: the internal timing is in holdover mode
Input signalModulated IRIG-A/B, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 signal, input insulated by transformer, input impedance 50 ohm, 600 ohm or 5 kohm selectable by jumper.

Unmodulated (DC level shift) IRIG-A/B, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 signal, input insulated by photocoupler.
Accuracy free run±1·E-8 if the decoder was synchronous for at least 1 h
IRIG Time Code InputIRIG – A002/A132, A003/A133, A006/A136, A007/A137, B002/B122, B003/B123, B006/B126, B007/B127, IEEE 1344, AFNOR NFS 87-500 and IEEE C37.118 (other codes on request)
Frequency OutputsFrequency synthesizer 1/8 Hz up to 10 MHz (TTL, sine 1,5Vrms)
Pulse OutputsThree programmable pulse outputs, TTL level
Channel 0 also with RS232 level
Precision of timebase±250 nsec compared to IRIG reference marker
Required accuracy of time code source: ±100ppm
InterfaceTwo independant serial RS232 interfaces
Serial Time String OutputBaud rate: 300 Bd…115200 Bd
Data format: 7E2, 8N1, 8N2, 8E1, 7N2, 7E1, 801
Time telegram: Meinberg Standard Time String , SAT, Uni Erlangen (NTP), SPA, RACAL, COMPUTIME, ION or Capture String
StatusbyteInformation about holdover mode, synchronisation since last reset and the validity of the RTC data.
Supported Timecode FormatsIRIG A002: 1000pps, DCLS signal, no carrier, BCD time of year
IRIG A132: 1000pps, AM sine wave signal, 10 kHz carrier, BCD time of year
IRIG A003: 1000pps, DCLS signal, no carrier, BCD time of year, SBS time of day
IRIG A133: 1000pps, AM sine wave signal, 10kHz carrier, BCD time of year, SBS time of day
IRIG A006: 1000pps, DCLS signal, no carrier, BCD time of year, BCD year
IRIG A136: 1000pps, AM sine wave signal, 10kHz carrier, BCD time of year, BCD year
IRIG A007: 1000pps, DCLS signal, no carrier, BCD time of year, BCD year, SBS time-of-day
IRIG A137: 1000pps, AM sine wave signal, 10kHz carrier, BCD time of year, BCD year, SBS time-of-day
IRIG B002: 100pps, DCLS signal, no carrier, BCD time of year
IRIG B122: 100pps, AM sine wave signal, 1 kHz carrier, BCD time of year
IRIG B003: 100pps, DCLS signal, no carrier, BCD time of year, SBS time of day
IRIG B123: 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day
IRIG B006: 100 pps, DCLS Signal, no carrier, BCD time of year, BCD year
IRIG B126: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time of year, BCD year
IRIG B007: 100 pps, DCLS Signal, no carrier, BCD time of year, BCD year, SBS time-of-day
IRIG B127: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time of year, BCD year, SBS time-of-day
IEEE1344: Code according to IEEE1344-1995, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day, IEEE1344 expansion for date, time zone, daylight saving and leap second in Control Funktions Segment
C37.118: Like IEEE1344 – with turned sign bit for UTC-Offset
AFNOR: Code according to NFS-87500, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, complete date, SBS time of day
Output signalModulated IRIG-A/B, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 signal, 3 Vpp (high) and 1 Vpp (low) into 50 ohm.

Unmodulated (DC Level Shift) IRIG-A/B, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 signal, TTL into 50 ohm and RS-422, active high or active low selectable by jumper.
Time-Trigger inputsTriggered by falling TTL slope
Time of trigger event readable via computer slot or optional second RS232-interface
Electrical ConnectorsFemale BNC-connectors
male 9-pole D-Sub connector
Computer interfaceSingle lane (x1) PCI Express (PCIe) Interface
PCI Express r1.0a compatible
Backup Battery TypeWhen main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years
Board typeLow Profile card (68,90 x 150 mm)
Supported TemperatureOperational: 0 – 50 °C (32 – 122 °F)
Storage: -20 – 70 °C (-4 – 158 °F)
Supported HumidityMax. 85 % (non-condensing) at 40 °C
WarrantyThree-year warranty
OptionsOptical input and/or output for time codes, ST connector for GI 50/125µm or GI 62,5/125µm gradient fibreOCXO-LQ, -SQ, -MQ, -HQ (specifications look at oscillator options) for higher accuracy in holdover mode
RoHS Status of ProductThis product is fully RoHS-compliant.
WEEE Status of ProductThis product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.

Супутні товари

Відправити запит на товар