Ваш кошик зараз порожній!
TCR180PEX-EL
TCR180PEX приймає часові коди IRIG-A/B, IEEE 1344, IEEE C37.118 або AFNOR NF S87-500 і може використовуватися для синхронізації системного часу свого ПК
Опис
TCR180PEX-EL приймає часові коди IRIG-A/B, IEEE 1344, IEEE C37.118 або AFNOR NF S87-500 і може використовуватися для синхронізації системного часу свого ПК. Вихідний сигнал цієї карти може генерувати сигнал IRIG для інших зчитувачів часових кодів IRIG. Формат виводу незалежний від вхідного сигналу IRIG – ідеальне рішення для ваших потреб у перетворенні IRIG.
ХАРАКТЕРИСТИКИ
| Status Indicators | Status info by 4 LED light indicators (2mm light pipes)Init – blue: while the receiver passes through the initialization phaseData – green: correct time code detectedTele – green: telegramm consistentFail – red: the internal timing is in holdover mode |
| Input signal | Modulated IRIG A/B, IEEE1344, IEEE C37.118 or AFNOR NF S87-500 signal, input insulated by transformer, input impedance 50 ohm, 600 ohm or 5 kohm selectable by jumper. Unmodulated (DC level shift) IRIG A/B, IEEE1344, IEEE C37.118 or AFNOR NF S87-500 signal, input insulated by photocoupler. |
| Accuracy free run | ±1·E-6 if the decoder was synchronous for at least 1 h |
| IRIG Time Code Input | IRIG – A002/A132, A003/A133, A006/A136, A007/A137, B002/B122, B003/B123, B006/B126, B007/B127, IEEE 1344, AFNOR NFS 87-500 and IEEE C37.118 (other codes on request) |
| Frequency Outputs | 10MHz TTL |
| Pulse Outputs | Fix pulse output PPS (TTL or RS232) and PPM (TTL) on D-Sub connector. |
| Precision of timebase | ±750 nsec compared to IRIG reference marker Required accuracy of time code source: ±100ppm |
| Interface | Two independant serial RS232 interfaces |
| Serial Time String Output | Baud rate: 300 Bd…115200 Bd Data format: 7E2, 8N1, 8N2, 8E1, 7N2, 7E1, 801 Time telegram: Meinberg Standard Time String , SAT, Uni Erlangen (NTP), SPA, RACAL, COMPUTIME, ION or Capture String |
| Statusbyte | Information about holdover mode, synchronisation since last reset and the validity of the RTC data. |
| Time-Trigger inputs | Triggered by falling TTL slope Time of trigger event readable via computer slot or optional second RS232-interface |
| Electrical Connectors | Female BNC-connector for input signal male 9-pole D-Sub connector |
| Computer interface | Single lane (x1) PCI Express (PCIe) Interface PCI Express r1.0a compatible |
| Backup Battery Type | When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years |
| Board type | Low Profile card (68,90 x 150 mm) |
| Supported Temperature | Operational: 0 – 50 °C (32 – 122 °F) Storage: -20 – 70 °C (-4 – 158 °F) |
| Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
| Warranty | Three-year warranty |
| RoHS Status of Product | This product is fully RoHS-compliant. |
| WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
