Ваш кошик зараз порожній!
Lantime M3000
Нова LANTIME M3000 — це надзвичайно гнучка система, яку можна модернізувати в польових умовах, що задовольняє ваші потреби синхронізації — сьогодні та в майбутньому.
Опис
ОПИС
Нова LANTIME M3000 — це надзвичайно гнучка система, яку можна модернізувати в польових умовах, що задовольняє ваші потреби синхронізації — сьогодні та в майбутньому.
Шаси M3000 має чотири слоти для блоків живлення, два слоти для модулів тактової частоти, слот для плати безшовного перемикання, слот для процесора та десять слотів для додаткових модулів введення та виведення. Додавання другого модуля тактової частоти та необхідного модуля перемикання RSC перетворить M3000 на повністю резервне рішення. Можна встановити до чотирьох блоків живлення, що забезпечує захист від виходу з ладу одного або кількох джерел живлення або збоїв блоків живлення. Модель блоку живлення змінного струму широкого діапазону та блоку живлення постійного струму 20-60 В можна комбінувати та підбирати за потреби.
Можливість додавання модулів введення та виведення, а також спеціалізованих комунікаційних карт для синхронізації та дистанційного керування мережами NTP та PTP/IEEE1588 гарантує, що LANTIME M3000 відповідатиме всім вашим вимогам до синхронізації, а масштабованість та гнучкість концепції платформи IMS дозволяють їй справлятися зі змінними вимогами ваших критично важливих застосувань.
ХАРАКТЕРИСТИКИ
Supported Reference Signals | The following reference sources can be used to synchronize the system: GPS – Global Positioning System GLONASS – Russian GNSS GALILEO – European GNSS BeiDou – Chinese GNSS PZF – German DCF77 longwave radio signal PTP/IEEE1588 – Precision Time Protocol NTP – Network Time Protocol SyncE – Synchronous Ethernet Timecodes – IRIG/AFNOR timecodes (AM/DCLS) PPS -Pulse Per Second 10MHz – 10MHz reference frequency 2.048kHz – 2.048kHz reference frequency E1/T1 – Telecom Synchronization Input with full SSM/BOC support The priority of all input signals can be freely configured in addition to a bias value and a precision level specification for each source. |
Status Indicators | Four bicolor LEDs showing status of: – reference time – time service – network – alarmTwo status LEDs for the optional use of an ACM (Active Cooling Module) with two fans – Fan 1 and Fan-2. |
Display | LC Display, 4 x 16 characters |
Control Elements | Eight push buttons to set up basic network parameters and to change system settings. |
Frequency Outputs | Frequency Synthesizer for arbitrary frequencies between 0.125 Hz and 10 MHz, adjustable phase, output via external modules such as IMS-BPE modules |
Accuracy of Pulse Outputs | < ±50ns (OCXO SQ, OCXO HQ, OCXO DHQ) |
Network Interface | Basic Chassis: CPU-C05F1 1 x 10/100 MBit, RJ45 CPU-C15G2 1 x 100/1000BASE-T RJ45 1 x 1000BASE-T SFP Network Expansion – LNE Options: Up to 24 additional network interfaces (GbE Gigabit Support) with 10/100/1000 MBit RJ45 connector or 1000BASE-T SFP (Multimode / Singlemode). |
Universal Serial Bus (USB) Ports | 1x USB port on front panel for: – installing firmware upgrades – performing backups and restoration of configuration files – copying security keys – locking & unlocking front buttons |
Operating Voltage | Maximum power range: AD10: 90 – 265 V AC, 47-63 Hz / 90-250 V DC DC20: 20 – 60 V DC DC10: 10 – 36 V DC Redundant power supplies available |
Form Factor | Modular rackmount 3U / 84HP chassis for standard 19” racks |
CPU | CPU-C15G2Intel® Atom™ Processor E Series (2 Cores, 1.33GHz, TDP 3W)Main Memory: onboard 2 GBCache Memory: 1MB 2nd Level CacheFlash Disk: 4 GBCPU-C05F1AMD Geode™ LX 800 (500 MHz, 128 KB L2 cache, 3.6 W)Main Memory: onboard 256 MByteFlashdisk: 1 GB |
Operating System of the SBC | GNU/Linux 4.x |
Network Protocols OSI Layer 4 (Transport Layer) | TCP, UDP |
Network Protocols OSI Layer 7 (Application Layer) | Telnet, FTP, SSH (including SFTP, SCP), HTTP, HTTPS, syslog, SNMP |
Internet Protocol (IP) | IPv4, IPv6 |
Network Autoconfiguration Support | IPv4: Dynamic Host Configuration Protocol – DHCP (RFC 2131) IPv6: Dynamic Host Configuration Protocol – DHCPv6 (RFC 3315) and Autoconfiguration Networking – AUTOCONF (RFC 2462) |
Network Time Protocol (NTP) | NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905) SNTP v3 (RFC 1769), SNTP v4 (RFC 4330) MD5 / SHA-1 Authentication and Autokey Key Management |
Network Time Security (NTS) | As of LTOS version 7.08, all Meinberg IMS LANTIME time servers offer full support for NTS (Network Time Security) in unicast client/server mode. |
Parallel Redundancy Protocol (PRP) | PRP (IEC 62439-3) |
Time Protocol (TIME) | Time Protocol (RFC 868) |
IEC 61850 | Synchronization of IEC 61850-compliant devices using SNTP |
Hypertext Transfer Protocol (HTTP) | HTTP/HTTPS (RC 2616) |
Secure Shell (SSH) | SSH v1.3, SSH v1.5, SSH v2 (OpenSSH) |
Telnet | Telnet (RFC 854-RFC 861) |
Simple Network Management Protocol (SNMP) | SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418) |
Physical Dimensions | 483 mm x 133 mm x 280 mm (307 mm)* – width x height x depth * The sizes in brackets take into account the connections and module handles. |
Supported Temperature | Operational: 0 – 50 °C (32 – 122 °F) Storage: -20 – 70 °C (-4 – 158 °F) |
Supported Humidity | Max. 95 % (non condensing) at 40 °C (104 °F) |
Technical Support | Meinberg offers free lifetime technical support via telephone or e-mail. |
Warranty | Three-year warranty |
Firmware Updates | Firmware is field-upgradeable, updates can be installed directly from the unit or via a remote network connection. Software updates are provided free of charge for the lifetime of your Meinberg product. |
RoHS Status of Product | This product is fully RoHS-compliant. |